Battlefront II command post for 1/12

Battlefront II command post for 1/12

STL files for printing a command post for 1/12 figures (6 inch). Includes base, lower cover and "holografic image" for printing


Also includes laser cutting patterns for light and symbol in 3 mm acrylic


Designed to work with a 12v powered LED stripe with 4 CR1220 batteries and a micro sliding switch



  • Please read carefuly

    Please note that these files were made specifically for printing on Zortrax's M200 Plus printer at .09 layer, so, small details and tolerances may vary from one printer to another. Some failed prints may also be a possibility. In some printers, a wall thickness correction from .2 to .3 mm is required (if your slicer allows it).